Dry Type Transformers Suppliers, Saudi Arabia

Dry-type transformers use air or cast resin for insulation instead of oil, eliminating fire and environmental contamination risks associated with liquid-filled units. They are widely specified for indoor installations in GCC high-rise buildings, hospitals, data centers, shopping malls, and metro stations where fire safety codes prohibit oil-filled equipment. Procurement considerations include insulation class, enclosure ventilation, and noise levels for occupied building environments.

0 suppliers found

Active:Contractor Trading Co. Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about dry type transformers in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Dry-type transformers rely on air convection and cast resin insulation rather than oil, making them inherently safer for indoor installations where fire risk must be minimized. In the UAE and Saudi Arabia, they are the default choice for building basements, mezzanine electrical rooms, hospitals, shopping malls, metro tunnels, and data centers where civil defense codes restrict or prohibit oil-filled electrical equipment.

Cast resin dry-type transformers are manufactured by vacuum-encapsulating the windings in epoxy resin, achieving insulation class F (155 degrees Celsius) or H (180 degrees Celsius). This construction provides excellent resistance to dust, humidity, and chemical environments, making them suitable for coastal GCC locations as well as industrial settings with airborne contaminants.

Standard ratings range from 100 kVA to 3,150 kVA with primary voltages of 11 kV or 13.8 kV. Key specifications include temperature rise class, enclosure IP rating (IP21 for clean indoor rooms, IP31 or IP54 for dusty environments), short-circuit withstand capability, and acoustic noise level. For transformers installed near occupied spaces in hotels or hospitals, noise levels below 55 dB at 1 meter are typically specified.

GCC buyers should be aware that dry-type transformers have higher initial costs than oil-filled equivalents, typically 30 to 50 percent more. However, they eliminate the need for oil containment bunds, fire suppression systems, and periodic oil testing, often making them more economical on a total installed cost basis for indoor applications. Confirm compliance with IEC 60076-11 and request climate class C2 (suitable for transport and storage at minus 25 degrees Celsius) for units shipped during GCC winter months.

Frequently Asked Questions — Dry Type Transformers

When should we specify dry-type transformers instead of oil-filled in the GCC?

Dry-type transformers should be specified whenever the transformer is installed indoors, in occupied buildings, near fire escape routes, in basement substations, or in environmentally sensitive areas. UAE civil defense regulations and Saudi Building Code provisions typically mandate dry-type or K-class liquid-filled transformers for indoor building substations.

What enclosure IP rating is appropriate for dry-type transformers in the Gulf?

For clean, air-conditioned electrical rooms, IP21 is sufficient. For rooms without air conditioning or locations with potential dust ingress, specify IP31 or higher. Industrial environments with heavy dust or moisture should use IP54 enclosures with forced ventilation to maintain proper cooling airflow.

Do dry-type transformers need derating in high ambient temperatures?

Yes. Standard dry-type transformers are rated for 40 degrees Celsius ambient. In GCC electrical rooms that may reach 45 to 50 degrees Celsius without adequate ventilation, derating of 3 to 5 percent per degree above 40 degrees Celsius applies. Ensure the electrical room design includes sufficient ventilation or cooling to keep ambient temperatures within the transformer's rated range.