Ceramic & Porcelain Tiles Suppliers, Saudi Arabia

Ceramic & Porcelain Tiles are the most widely used flooring and wall covering material in GCC construction, available in an extensive range of sizes, finishes, and performance grades. Porcelain tiles with low water absorption are preferred for exterior and high-traffic applications, while ceramic tiles serve residential and light commercial interiors. The Gulf imports tiles primarily from Italy, Spain, India, and China, supplemented by regional manufacturers in the UAE and Saudi Arabia.

0 suppliers found

Active:API ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about ceramic & porcelain tiles in Saudi Arabia and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Ceramic and porcelain tiles are manufactured from pressed clay bodies fired at high temperatures, with porcelain tiles distinguished by their denser body and water absorption below 0.5 percent (per ISO 13006 Group BIa). Available in sizes from 100 x 100mm mosaic formats to 1200 x 2400mm large-format slabs, tiles are offered in glazed, polished, matt, structured, and anti-slip finishes. Digital printing technology enables realistic reproductions of marble, wood, concrete, and fabric textures.

In the UAE and Saudi Arabia, tile selection is driven by application requirements: slip resistance (R-value per DIN 51130 — R10 or R11 for wet areas), abrasion resistance (PEI Class III to V for commercial floors), breaking strength, frost resistance (less relevant in the GCC but important for cold stores), and chemical resistance for industrial areas. Large-format porcelain tiles (600 x 1200mm and above) are increasingly popular for lobby and commercial floor installations to minimise grout joints and create a seamless visual effect.

Major tile brands in the GCC market include RAK Ceramics (UAE), Saudi Ceramics, Porcelanosa, Marazzi, Kajaria, and numerous Italian and Spanish boutique brands. Procurement managers should request product technical datasheets confirming ISO 13006 classification, verify colour batch consistency (especially for large orders), and coordinate with the interior designer on grout colour and joint width. For large commercial projects, buyers should reserve production lots early to ensure colour and calibre consistency across the full delivery programme. Typical lead times are 2 to 4 weeks from regional stock, or 8 to 14 weeks for factory orders from European or Asian origins.

Frequently Asked Questions — Ceramic & Porcelain Tiles

What is the difference between ceramic and porcelain tiles?

Porcelain tiles have a denser body with water absorption below 0.5 percent, making them harder, more durable, and suitable for exterior and high-traffic applications. Ceramic tiles have higher water absorption (3 to 10 percent), are easier to cut, and are typically less expensive — suitable for interior walls and light-traffic residential floors.

What slip resistance rating should I specify for a hotel lobby in Dubai?

For indoor dry areas such as hotel lobbies, tiles with a minimum R9 slip resistance per DIN 51130 are typically specified. For areas subject to occasional wet conditions (near entrances or pool decks), R10 or R11 is recommended. The project's interior designer and health and safety consultant should confirm the specific requirement based on the area's intended use.

Can large-format porcelain tiles be used for exterior paving in the GCC?

Yes, 20mm-thick porcelain pavers in large formats (600 x 600mm, 600 x 1200mm) are increasingly specified for exterior terraces, balconies, and pool surrounds in the Gulf. These heavy-duty tiles are installed on pedestals, sand-cement beds, or directly on compacted gravel. Select products with minimum R11 slip resistance and verify that the tile's thermal expansion is compatible with the expected temperature range.