Tank Farm Equipment Suppliers, UAE

Tank Farm Equipment encompasses the pumps, valves, manifold piping, instrumentation, fire protection systems, and control infrastructure that collectively operate and protect a group of storage tanks at oil and gas terminals, refineries, and petrochemical plants. This category addresses everything needed to make individual storage tanks function as an integrated operational system. In the GCC, where tank farms at Ras Tanura, Fujairah, and Yanbu handle millions of barrels daily, this equipment is essential to terminal throughput and safety.

0 suppliers found

Active:API Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about tank farm equipment in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Tank farm equipment brings together the mechanical, electrical, and instrumentation systems required to operate, monitor, and protect groups of storage tanks in the petroleum terminals and processing facilities of Saudi Arabia and the UAE. While individual tanks provide the storage capacity, it is the tank farm equipment — pumps, valves, manifolds, instruments, and safety systems — that enables efficient product receipt, transfer, blending, and dispatch operations.

Key equipment categories include tank transfer pumps (centrifugal or positive-displacement per API 610/676), remotely operated tank root valves, manifold piping and valve arrays for product routing, level and temperature instrumentation (radar level gauges, multi-spot temperature sensors), tank mixers and agitators, and fire protection systems including foam generators, water monitors, and deluge valves. The control room DCS/SCADA system integrating all instrumentation into an automated tank gauging (ATG) system is also a critical component.

Procurement managers should specify equipment in accordance with the applicable industry codes (API 610 for pumps, API 600/608 for valves, API 2350 for overfill protection, NFPA 11/30 for fire protection) and the operator's engineering standards. Integration and interoperability between different equipment suppliers is a common challenge — specifying a common communication protocol (HART, Foundation Fieldbus, or Modbus) simplifies integration. GCC-specific considerations include materials rated for H2S where applicable, equipment housings rated for outdoor installation in extreme heat and sandstorm conditions, and compliance with the operator's safety instrumented system (SIS) requirements for critical protection functions.

Frequently Asked Questions — Tank Farm Equipment

What level measurement technology is best for GCC storage tanks?

Radar level gauges (either non-contact FMCW or guided wave) are the industry standard for tank farm applications, offering high accuracy (plus or minus 1 mm for custody transfer) and reliability without moving parts. Servo gauges remain in use for high-accuracy custody transfer applications. For crude oil tanks, non-contact radar with stilling wells is preferred due to surface turbulence and foam.

What fire protection is required for a GCC tank farm?

GCC tank farm fire protection typically includes rim seal foam pourers and full-surface foam systems for each tank, fire water ring mains with monitors and hydrants, deluge cooling systems for adjacent tanks, fixed and portable foam proportioning systems, and fire and gas detection networks. Design must comply with NFPA 11, NFPA 30, and the local civil defense authority requirements.

How is overfill protection managed?

API 2350 requires independent high-level and high-high-level alarms plus an automatic overfill prevention system (OPS) that closes inlet valves before the tank reaches critical level. The OPS must be independent from the normal level control system and should be designed as a safety instrumented system (SIS) with the required SIL rating. Regular proof testing of the OPS is mandatory.

What communication protocols should tank farm instruments use?

HART is the most common protocol for individual field instruments in GCC tank farms, providing digital diagnostics over traditional 4-20 mA loops. Foundation Fieldbus is used in newer installations for advanced diagnostics and reduced wiring. The ATG system typically uses proprietary or Modbus TCP communication to the control room. Standardizing on one or two protocols across the tank farm reduces integration complexity and maintenance costs.