Skip to main content

Rubber Seals & Gaskets Suppliers, UAE

Covers O-rings, oil seals, mechanical seals, flat gaskets, hydraulic seals, pneumatic seals and custom-molded rubber sealing elements for industrial, automotive and oilfield applications. Rubber seals and gaskets prevent leakage of fluids and gases in pressurised systems and are among the most frequently procured maintenance items in GCC plants. Procurement teams source by seal type, elastomer compound, size and specification.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters2 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:API ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about rubber seals & gaskets in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Rubber seals and gaskets are mission-critical components in virtually every pressurised system across the UAE and Saudi Arabia — from flanged piping joints in ADNOC and Aramco refineries to hydraulic cylinders on construction machinery and pneumatic actuators in packaging lines. This category encompasses O-rings, quad-rings, oil seals (rotary shaft seals), hydraulic rod and piston seals, pneumatic cup seals, U-cups, V-packings, flat-cut gaskets, molded gaskets and mechanical seal elastomer elements.

The GCC operating environment imposes severe demands on seal materials. Ambient temperatures above 50 degrees Celsius, H2S exposure in sour-gas service, aggressive chemicals in petrochemical plants, and sand-laden atmospheres all require careful elastomer selection. Common compounds include nitrile (NBR) for general oil service, Viton (FKM) for high-temperature and chemical service, EPDM for steam and water, HNBR for oilfield sour-gas, and FFKM (Kalrez equivalent) for the most extreme chemical and thermal conditions.

Procurement managers should specify the seal profile, cross-section dimensions, groove dimensions, elastomer compound, hardness and any industry certifications such as NORSOK M-710 for subsea, API 6A for wellhead, or FDA for food processing. Many GCC seal distributors stock thousands of standard O-ring sizes (AS568, BS 1806, metric) and offer rapid custom-molding for non-standard profiles. Evaluate suppliers on compound-specific technical support, shelf-life management, batch traceability and turnaround time for emergency orders.

Frequently Asked Questions — Rubber Seals & Gaskets

Which elastomer is best for high-temperature sealing in refineries?
Viton (FKM) is the standard choice for continuous service up to 200 degrees Celsius with excellent resistance to hydrocarbons, acids and solvents. For temperatures up to 300 degrees Celsius or extremely aggressive chemicals, FFKM (perfluoroelastomer) seals such as Kalrez are specified, though at significantly higher cost.
How do I determine the correct O-ring size for a seal groove?
Measure the groove inner diameter and cross-section width. Select an O-ring with an inner diameter that provides 1-5 percent stretch when installed and a cross-section that fills 70-85 percent of the groove volume, leaving room for thermal expansion and media swell. Standard sizing charts (AS568 for imperial, metric ISO 3601) simplify selection.
What is the shelf life of rubber seals stored in the GCC?
Per SAE ARP5316, nitrile and neoprene seals have a 15-year shelf life, Viton and silicone have 20 years, and EPDM has 10 years from the cure date, provided seals are stored in cool, dark, ozone-free conditions below 40 degrees Celsius. In the Gulf, climate-controlled storage is essential to achieve these shelf-life targets.