Skip to main content

Gas Compressors Suppliers, UAE

Gas Compressors are rotating or reciprocating machines used to increase the pressure of natural gas for transmission through pipelines, injection into reservoirs, or feed to processing plants. This category covers reciprocating, centrifugal, and screw compressors along with their drivers, control systems, and auxiliary equipment. In the GCC, gas compressors are critical infrastructure for the expanding gas master systems of Saudi Arabia and the UAE, supporting gas gathering, transmission, and reinjection operations.

0 suppliers found

CityAll CitiesDubaiAbu DhabiSharjahAjmanRas Al KhaimahFujairah
Filters2 Verified Manufacturer Distributor Trading Co. Contractor 3+ 3.5+ 4+ 4.5+ ISO 9001 ISO 14001 ISO 45001 CE Marking API ASME 5+ yrs 10+ yrs 15+ yrs 20+ yrs
SortRelevanceHighest RatedMost ReviewsNewest
Active:ISO 45001 API Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request QuotesClear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about gas compressors in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Gas compressors are among the most capital-intensive and operationally critical rotating equipment items in the oil and gas infrastructure of Saudi Arabia and the UAE. As both nations aggressively expand their gas processing capacity and pipeline networks to fuel domestic power generation, petrochemical feedstock supply, and enhanced oil recovery through gas injection, the demand for reliable, efficient compression equipment continues to grow.

Reciprocating compressors are the standard choice for low-to-medium flow applications with high compression ratios, commonly used at wellhead gas gathering stations and small gas lift systems. Centrifugal compressors handle high-volume, moderate-ratio applications typical of gas transmission pipelines and large processing plants. Screw compressors serve niche roles in vapor recovery and low-pressure boosting. Key specifications include suction and discharge pressure, flow capacity (in MMSCFD), gas composition (particularly H2S and CO2 content), operating temperature range, and driver type (electric motor or gas turbine).

Procurement teams should evaluate compliance with API 618 (reciprocating), API 617 (centrifugal), or API 619 (screw), and verify materials are suitable for sour gas service per NACE MR0175 where applicable. Major compressor OEMs serving the GCC include Atlas Copco, Siemens Energy, Baker Hughes (Nuovo Pignone), Ariel, and Dresser-Rand. Regional overhaul and spare parts support is available through OEM service centers in Abu Dhabi, Dammam, and Dubai. Lead times for new compressor packages range from 30-60 weeks depending on size and configuration, so early procurement during the FEED phase is essential.

Frequently Asked Questions — Gas Compressors

How do I choose between reciprocating and centrifugal compressors?
Reciprocating compressors are preferred for flows below approximately 50 MMSCFD, high compression ratios (above 3:1 per stage), or variable flow conditions requiring speed or capacity control. Centrifugal compressors are the choice for high-volume applications (50-500+ MMSCFD) with relatively stable flow conditions. Many GCC gas systems use centrifugal for mainline compression and reciprocating for wellhead or booster service.
What materials are required for sour gas compressor service?
Compressor internals exposed to sour gas (containing H2S) must comply with NACE MR0175/ISO 15156. This typically requires low-hardness carbon steel or alloy steel for cylinders, NACE-compliant valve materials, and corrosion-resistant coatings or cladding. Centrifugal compressor impellers may require precipitation-hardened stainless steel or nickel alloys depending on H2S concentration.
What are typical lead times for gas compressor packages?
Standard reciprocating compressor packages take 30-40 weeks from order to delivery. Centrifugal compressor trains with gas turbine drivers typically require 40-60 weeks due to the complexity of engineering, manufacturing, and factory testing. Buyers should initiate procurement during the FEED phase to align delivery with construction schedules.
What maintenance considerations apply in GCC conditions?
GCC ambient temperatures (exceeding 50 degrees Celsius) require enhanced cooling systems — air-cooled aftercoolers and oil coolers must be sized for extreme conditions. Sand and dust ingestion necessitates high-efficiency air filtration. Maintenance intervals may be shorter than temperate climate norms due to thermal stress. Ensure the OEM provides a regional spare parts inventory and service team to minimize downtime.