Threaded Fittings Suppliers, UAE

Threaded fittings are forged components with NPT or BSP threads including elbows, tees, couplings, nipples, unions, and bushings for small-bore piping connections where welding is impractical or disassembly is required. Manufactured to ASME B16.11 in 2000 lb and 3000 lb classes from ASTM A105 and A182 materials. GCC utility, instrument, and low-pressure process systems use threaded fittings extensively, supported by large stocks at regional industrial piping distributors.

0 suppliers found

Active:Verified API ASME Clear all

No suppliers match these filters

Try clearing some filters — or post your requirement and let matching suppliers come to you.

Request Quotes Clear all filters

Post your requirement, get quotes from multiple suppliers

Tell us about threaded fittings in UAE and receive competitive quotes from verified suppliers — free, fast, and no obligation.

Get Free Quotes

Threaded pipe fittings serve utility piping, instrument connections, low-pressure process systems, and mechanical installations across the UAE and Saudi Arabia. Manufactured to ASME B16.11 in 2000 lb and 3000 lb pressure classes, they provide removable connections for pipe sizes typically from 1/8 inch to 4 inches.

Common threaded fitting types include 90-degree and 45-degree elbows, street elbows, equal and reducing tees, couplings, half couplings, unions, hex nipples, bushings, plugs, and caps. Thread types are NPT (National Pipe Taper) per ASME B1.20.1 or BSP (British Standard Pipe) depending on project specification. Materials include ASTM A105 for carbon steel and A182 grades for alloy and stainless steel.

In GCC industrial facilities, threaded fittings are used for instrument connections, compressed air lines, water utilities, fire protection branch connections, and equipment drain and vent points. Procurement managers should specify thread type (NPT or BSP), pressure class, material grade, and confirm that fittings carry the manufacturer's marking with heat number traceability. GCC piping distributors in Dubai and the Saudi Eastern Province maintain extensive threaded fitting inventories in carbon and stainless steel for rapid delivery to project sites.

Frequently Asked Questions — Threaded Fittings

What is the difference between NPT and BSP threads?

NPT (National Pipe Taper) is the North American standard with a 60-degree thread angle and 1:16 taper. BSP (British Standard Pipe) uses a 55-degree thread angle. NPT is more common in GCC oil and gas projects due to ASME/API prevalence, but BSP is used in some European-designed systems and water utilities.

When should threaded fittings be used instead of socket-weld fittings?

Threaded fittings are preferred where welding is impractical, in non-critical low-pressure services, where frequent disassembly is needed, and in fire-risk areas where hot work permits are restricted. Socket-weld is preferred for higher pressures and where a permanent leak-tight connection is required.

What thread sealants are approved for GCC process piping?

PTFE tape (Teflon tape) is the most widely used sealant for low-pressure utility services. For process piping, anaerobic thread sealants like Loctite 567/577 or PTFE pipe dope compounds are specified. Sealant selection must comply with the process fluid compatibility and project specifications.